Manual for Jasuto Pro

[lastfuture]

Hello there,

I was wondering when you'll be finished with the full version of the manual. I want to understand things better, like how to really get the routing to do what I want, what the different parameters for the modules do and so on. I found another post in which I think you said you'd try to get it out one or two weeks ago.
I can hardly wait to really dive into things, but as of now the wiring options and the parameters confuse me.

Can you say when it'll be released?

-- lasty

[Jbrave]

The manual that Hemicube created *is* the one you get from the help menu - initially it was just a temporary page, but now it has information on each node. There is enough info there to figure out how to use all of the nodes, even if it is kind of minimalist. It could be improved if he added usage examples. Post your questions to the forum, and I'll help you to the best of my knowledge if nobody else gets back to you.

- Joel

[lastfuture]

But the Manual right now (the one at http://www.jasuto.com/pro/JasutoProManual.pdf that you reach through the app) states on the first page that

The manual will be completed the first week of January 2010, sorry Apple really surprised me with an unbelievably quick release.
See below for a quick start guide and a node reference chart for now.

I take that it is not complete and there should be more than the node reference by now, right? Am I missing something?

[Jbrave]

Hi LastFuture,

Yes you are correct, there is a more comprehensive manual in the works, however I don't know the timeframe.

- Joel

[hemicube]

@Lastfuture, you aren't missing anything. As Joel mentioned I'm working on the manual as we speak, it will be finished soon...

[vandal138]

is the new manual online yet or is it still being worked on?

[Horaflora]

until it's mentioned in the manual properly, what does "spacial" (in the movement section) do exactly?
thanks!

[hemicube]

Spacial in the Motion menu: when this is enabled motion data isn't reset when a nearby trigger fires. So you can use this to make out of sync LFO's, etc...

Spacial in the Wire editor: when this is enabled the distance of the two connected nodes is ignored, and the port will receive 100% of the signal. You can use this like a long distance link instead of Send/Recv...

I'll rename those toggles to something more appropriate.


Chris
_

[Horaflora]

cheers!

[vandal138]

any word on when this manual will be done? I've ran into a few speedbumps and think the manual would help greatly.

cheers